Publicidad
support@nextlevelracing.com
PRE-RACE
CHECKS
WARNING
•
Please do not use power tools for assembly as over tightening can damage your frame.
•
Do not adjust the Hubs while sitting in cockpit.
•
Make sure the Hubs are tightened fully before using the cockpit (Spin the Hub clockwise to ensure it is fully tight).
•
Make sure the Wheel Deck strap on the Wheel Bar is tight when adjusting the Hubs, otherwise the Wheel Plate
Tube will fall when Hubs are open.
•
Moving parts present a pinch hazard. Take care when adjusting to avoid injury.
If you require any support with
your product please contact our friendly team at:
support@nextlevelracing.com
WARNING
CHOKING HAZARD - Small parts not for children under 3 years
or any individuals who have a tendency to place inedible objects
in their mouths.
ASSEMBLY
VIDEO
bit.ly/nlrbuild
4
IN THE
BOX
*NOT TO SCALE
Backrest
Wheel plate
latch
Seat
Right shifter
socket
Left reclining
knob
Wheel plate
socket
Hub
Left shifter
Front leg
socket
1 x FABRIC SEAT & MAIN FRAME
1 x WHEEL PLATE TUBE
1 x REAR LEG
Video Instruction: bit.ly/nlrbuild
Reclining hinge
Securing bolt
1 x BACKREST BOTTOM TUBES
Pedal plates
Pedal frame
front tube
Swivel brackets
1 x PEDAL FRAME
5
Publicidad
