Sartorius Maxicaps MR Instrucciones De Manejo Originales página 26

Process Preparation
1
1
26 Maxicaps MR Operating Instructions
®
Procedure
Align the filter element with the handles in front of the trolley so that the
t
colored markings on the handles match the colored markings on the
trolley.
Position the Flexsafe
t
WARNING Risk of injury if the filter unit drops! Only hang the two
t
Lifting Gear hooks in the two attachment points (eyelets) (1) on the han-
dles.
Set the Lifting Gear to the width of the filter unit. Move the chain to a
t
suitable opening in the Lifting Gear setting range.
Recommendation: The chain should be positioned in the openings so
t
that the distance to the center is as equal as possible.
Lift the filter unit up using the Flexsafe
t
Move the Flexsafe
t
over the trolley.
Slowly lower the filter unit. Insert the two handles (1) in the trolley recess-
t
es (2).
1
2
STR Lifting Device over the filter unit.
®
STR Lifting Device.
®
STR Lifting Device over to the trolley and position it
®