Sartorius Maxicaps MR Instrucciones De Manejo Originales página 36

Operation
1
36 Maxicaps MR Operating Instructions
®
Operator 2:
CAUTION Danger of crushing fingers when moving the lever (1)!
t
Press the handle lock (2) and carefully move the lever downwards.
1
Carefully lift the handle up and off and put it down.
t
Move the lever (1) upwards.
t
The lock (2) engages.
y
Dismount the second handle in the same way.
t
2
Dispose of the filter unit (see Chapter "10 Storage and Shipping",
t
page 41).
Hang the two handles on the two holders (1) on the inside of the trolley.
t
1
6.8 Dismounting the Filter Unit and Handles
with Flexsafe
The filter units can be very heavy after the filtration process. It is recom-
mended to transport the filter unit with a Sartorius Flexsafe
Device.
Personnel: 2 people (operators)
Material: Lifting Gear Maxicaps
vice
Requirements
— The air filter is not in the air filter holder.
— The connections and valve actuators are disconnected from the filter
unit.
— The filter unit is in the filtration position.
— The Lifting Gear is installed on the Flexsafe
Flexsafe STR Lifting Device instructions).
®
STR Lifting Device
®
MR and Flexsafe
®
STR Lifting Device (see
®
STR Lifting
®
STR Lifting De-
®