SIS SIS10.ESY.00 Manual Del Usuario página 30

About the User Manual
1.7. Introduction
This manual of instructions on how to use the SIS Easy anti-collision device is intended for the Buyer/User, as well as the Fitter. It
provides details on the use of the device based on the purpose for which it was designed and the technical features.
The User Manual describes how to install the device, and use and service it correctly, to ensure that it gives the best possible results
and lasts a long time.
The instructions contained herein are intended for the following:
•
Plant manager
•
Fitters
•
Fork-lift truck drivers
•
Cleaning and maintenance personnel
The User Manual must be consulted with regard to the following information:
•
Operating conditions for the device
•
Instructions on:
o
Installation and set-up
o
Operation
o
Cleaning and maintenance
This manual must be read carefully and kept for future reference because it contains vital information on how to use the anti-collision
device correctly.
The SIS EASY anti-collision device presents no hazards for the operator if it is installed and used in accordance with the
Manufacturer's instructions and the industrial vehicle on which it is mounted is driven/manoeuvred by fully trained and authorised
personnel.
1.8. How to use the manual
This User Manual is an integral part of the SIS EASY 1.0 Mini anti-collision device and it is the responsibility of the Buyer/User to keep
it in good condition and make it available at all times for the operators and Fitters. It must be kept onboard the industrial vehicle on
which the device is installed.
If this User Manual gets lost or damaged, a replacement copy can be obtained from the Manufacturer.
The manual must be kept for the device's entire life cycle, even if it is sold on.
The Manufacturer reserves the right to make changes to the production process and the manual at any time, without this entailing the
obligation to update previous production processes and manuals.
1.9. Disclaimer
The Manufacturer disclaims all liability for:
•
improper use of the SIS Easy anti-collision device
•
use by unauthorised or untrained personnel
•
installation by unqualified personnel
•
a lack of cleaning and maintenance
•
failure to follow the instructions in this User Manual
•
modifications not authorised by the Manufacturer.
Pagina 30
MNL.000001 Rev.03 25.09.2019