1.10. Identification of the Manufacturer
The Manufacturer of the SIS Easy anti-collision device is, in accordance with regulations in force, identified by the following:
•
EC Declaration of Conformity (see Section 9)
•
CE marking on the device
•
User Manual
Removing the CE Marking plate and replacing it with another from a similar device present on the Buyer's/User's premises are strictly
forbidden.
If the CE Marking plate gets damaged or detached from the device, the Buyer/User must inform the Manufacturer promptly.
1.11. Warranty
1.5.1
Operating conditions
The Manufacturer's obligations under the warranty described herein are subordinate to the following conditions:
g)
The warranty is only valid if the product is installed, used and serviced correctly, and the Buyer performs the inspections
specified in the instructions provided by the Manufacturer in this User Manual, which is supplied together with the device and
the Buyer explicitly declares it has read and understood.
The warranty does not apply if, in the Manufacturer's opinion, the product has been serviced and/or modified and/or tampered
h)
with by subjects not referring to or authorised by the Manufacturer.
i)
The warranty does not apply in the event of defects or malfunctions occurring when the product is mounted or installed on
malfunctioning machinery and terminals or ones incompatible with the product's constructional/technical/operating
characteristics stated in this User Manual.
The warranty is only valid for correct operation of the device and its ability to interface with the vehicle on which it is installed,
in accordance with the technical specifications and within the limits indicated in the instruction handbook.
j)
The Buyer declares it is well aware of the fact that the anti-collision device does not replace the operator, it merely acts as an
aid, so the Buyer must train the operator on how to use the device properly.
k)
The proximity, temperature, pressure, load, light and gas sensors only operate correctly in the environmental conditions
described in the technical specifications herein. Ultrasound sensors only operate correctly in the absence of extraneous
sources operating on the same frequency.
l)
The warranty is invalidated if the anti-collision device is integrated with or mounted with sensors made by other manufacturers
or ones having characteristics that are incompatible with this device (see technical specifications in the instruction handbook)
or if used on vehicles the mass, weight and technical features of which are incompatible with the technical features appearing
in this User Manual.
1.5.2
Product warranty
The Seller warrants that the products comply with the quantity and description contained in the Order Confirmation and duly specified
in the instruction handbook, which the Buyer declares it has received, viewed and approved, and that they are free from manufacturing
defects.
For details of the warranty period, please refer to the purchase documentation.
The Buyer must examine the products, or have them examined by an expert, as soon as possible after purchase, in any case within
eight days of receipt, and must inform the Seller by fax or email of any product discrepancies or defects within the following terms,
otherwise the warranty is invalidated and all associated rights are forfeited:
•
within 8 (eight) days of delivery, for defects in terms of type or quantity;
•
within 8 (eight) days of delivery, for further evident faults or defects;
•
within 8 (eight) days of discovery for hidden faults or defects not identified on the time of delivery.
In such cases, the Seller is entitled to examine the products which the Buyer has reported as being faulty or defective, or have them
examined by an expert.
If the Seller ascertains that the products are effectively faulty or defective, it will, at its own discretion, either repair them or replace the
faulty or defective products and components free of charge.
Pagina 31
MNL.000001
Rev.03 25.09.2019