SIS SIS10.ESY.00 Manual Del Usuario página 33

Description of the SIS Easy anti-collision device
1.20. Description of the anti-collision device
The SIS Easy anti-colllision system has been designed and built for use as an aid in manoeuvring industrial vehicles. It is an ultrasonic
based device that, through the obstacles detection, allows to reduce the risk of collision between the vehicle and objects or persons.
The version covered by this manual (SIS Easy) is designed mainly for small forklift trucks (maximum width approx. 200 cm), on which
it can detect and display obstacles behind it (reverse protection)
2.1.1 Description of the display kit
2
1
Figure 18: Anti-collision display
The display unit comprises the following:
5. Programming button wich allows to select the needed distance preset
6. A loudspeaker, which transmits the acoustic alert to the operator.
7. An illuminated display, which gives a visual indication of the alert. The display can be green, yellow or red, depending on the
obstacle situation. Please refer to Section 5 – How to use the anti-collision device. The display lights up, i.e. indicates the
presence of obstacles, only when the vehicle is proceeding in reverse.
Figure 19: Hole layout
3
4
Flare
The display kit mainly comprises an advanced display and the
connectors/contacts/gaskets required to operate the system.
The display (Figura 1) works like a control unit that processes the data
received from the sensor and relays to the operator visual and acoustic
signals regarding the vehicle's operating conditions.
The shape is designed for easy installation in the cab of the forklift truck
without the need for invasive interventions.
The visual and acoustic signals transmitted to the operator are designed to
attract his attention without disturbing the driving and manoeuvring
operations.
Pagina 33
MNL.000001 Rev.03 25.09.2019
4. A supporting bracket, for
mounting the display in the cab.
The geometrical features are
shown in Figure 2.
The display kit includes two M3
DIN7500C self-tapping screws.
They can be used for direct
mounting with a blind hole or
through hole. The screws can be
used with metal or plastic
materials, using the same pre-
drilled hole.