Publicidad
!
Make sure to mount the mounting plate in the correct mounting holes on the outlet box!
!
If you are installing the fan in Canada, the safety cable must be secured to an existing part of the building
structure instead of the outlet box. Examples of acceptable building structures include a wooden beam or a
metal mounting brace secured between two beams. In some cases it may be necessary to install additional
structural material to provide attachment points.
A
Slide the rubber bumpers (a) on the extension tube brackets�
Ensure wiring has been routed to the fan site� Secure the mounting plate to the outlet box with the hardware supplied
B
with the outlet box.
Attach one mounting bracket to the mounting plate, but do not fully tighten� Raise the fan to the mounting bracket and
C
temporarily rest one rubber bumper (a) in the space between the bracket and plate to help support the fan while securing
the safety cable� Loop the safety cable (b) around the mounting plate, and then secure it with the shackle (c)� Allow the fan
to hang from the safety cable� This ensures there is enough space to make the wiring connections�
Hardware:
d. 6 mm Nylock Nut
HAIKU
®
BY BIG ASS FANS
WWW.BIGASSFANS.COM/TECHNICAL-SUPPORT
●
(877) BIG FANS
●
S0
15
Publicidad
