Publicidad
!
Make sure main power is disconnected from the fan location before installing the mounting bracket!
1� Slide the mounting ball (a) over the extension tube (b)�
A
2� Insert the 6 mm steel pin (c) into the hole at the top of the extension tube, and then slide the mounting ball upward,
seating the steel pin in the inner slots�
3� Insert the mounting ball wedge (d) into the mounting ball� Secure the mounting wedge with the 4 mm self tapping screw
(e)� Tighten the screw enough to prevent movement between the mounting ball and extension tube� Do not overtighten
the screw.
Secure the mounting bracket to the outlet box with the hardware supplied with the outlet box� Note: If mounting the
B
fan to a sloped ceiling, secure the mounting bracket so that the open side of the bracket is facing up the slope of the
ceiling.
HAIKU
®
BY BIG ASS FANS
WWW.BIGASSFANS.COM/TECHNICAL-SUPPORT
●
(877) BIG FANS
●
X2
cont.
31
Publicidad
