Publicidad
As you remove the fan from its packaging, make sure you are not missing any components required for assembly and
operation� If you ordered multiple fans, be sure to keep the components of each fan together! Certain fan components are not
interchangeable�
a
Mounting bracket
Mounting ball & wedge
b
c
Canopy
Extension tube†
d
e
Lower cover
(3) Airfoil
f
g
Fan hub
Wiring cover
h
†
7-inch (17�8 cm) and 20-inch (50�8 cm) extension tubes included�
††
If the EMI filter is included with your fan (country dependent), please install it with your fan�
†††
Safety cable is not shown�
††††
Haiku 52 and Haiku 60 only�
†††††
Haiku Bamboo and Haiku 84 only�
HAIKU
®
BY BIG ASS FANS
WWW.BIGASSFANS.COM/TECHNICAL-SUPPORT
●
i
Remote control
j
EMI filter (not shown)††
k
Mounting hardware
• 4 mm self tapping screw
• 6 mm steel pin
• (6) M4 x 6 mm screw
• (2) M4 lock washer
• Safety cable shackle†††
• (2) Motor bracket
• M6 x 32 mm bolt
• M6 x 28 mm bolt
• (2) M6 nut
(877) BIG FANS
●
l
Airfoil hardware
• (6) M5 airfoil screw
• (6) 5 mm lock washer††††
• (6) Airfoil grommet†††††
m
Wiring hardware
• (4) Wire nut
• Cable tie
7
Publicidad
