Össur ICELOCK 562 HYBRID Instrucciones Para El Uso página 14

If noise or leakage occurs, do as follows:
1. If using an active vacuum suspension, use a 3 mm hex key to remove
the 90° Unity
2. Remove the outlet port with an 8 mm wrench.
3. Use low air pressure to clean the air channels.
4. Clean or exchange the duckbill valves and assemble again correctly
(Fig. l).
REPORT A SERIOUS INCIDENT
Any serious incident in relation to the device must be reported to the
manufacturer and relevant authorities.
DISPOSAL
All components of the product and packaging should be disposed of in
accordance with respective national environmental regulations.
LIABILITY
Össur does not assume liability for the following:
• Device not maintained as instructed by the instructions for use.
• Device assembled with components from other manufacturers.
• Device used outside of recommended use condition, application, or
environment.
tube connector.
®
14