Installing The Head Fasteners - JF 1000 AT Manual De Instrucciones

B
26
Operation Technical Manual

INSTALLING THE HEAD FASTENERS

1.
Insert the two fasteners (A) into the holes
indicated in the figure on the side.
A
A
2.
Secure the fasteners with the nuts (B) and
washers (C) (figure on the side).
C
B = hex nut 7/16" with nylon lock (02 un)
C = flat washer Ø12 x Ø29 x 4.76 (02 un)
NOTE!
The screws, nuts and washers are located in the
kit supplied with the head.