Assembly Of The Roller Chain - JF 1000 AT Manual De Instrucciones

R
K
J
T
34
Operation Technical Manual

ASSEMBLY OF THE ROLLER CHAIN

P
1.
Q
S
2.
3.
H
J = Hex bolt 5/16" X 3/4" (04 un)
K = Flat washer 3/8" (04 un)
4.
NOTE!
The screws, nuts and washers are located in the
kit supplied with the head .
Put the roller chain (P) .
Adjust the chain using the tensioner (Q).
Release the nut (R) and press the tensioner
(S) to eliminate the clearance of the chain. Re-
tighten the nut (R).
Put the cover (H) and fix it with the four bolts
(J) and washers (K).
Finally, assemble the sharpener cover of the
harvester (T)
The picture besides shows the Head JF 1000 AT
assembled in the harvester.