Operation; Tractor Speed - JF 1000 AT Manual De Instrucciones

DANGER!
Never attempt to manually feed
the JF 1000-AT. The drums pull the
material before you can release it
from your hands. In contact with
moving drums, you may be pulled
and subjected to a very serious
accident.
Never attempt to clean or remove
any debris or straws from the
drums with the machine on.
Cleaning can only be done with
the power take-off switched off and
the key removed from the tractor.
Keep distance safe and do not
allow people to approach the
feeding area while the machine
is on.

OPERATION

The JF 1000-AT row independent head has a
working aperture of 1 meter. It has two drums
equipped with cutting system by saws. The drums
harvest and collect the plants which are led to the
feeding drums of the harvester, responsible for the
routing to the chopping rotor. Upon reaching the
Harvester's rotor, the plant is chopped and thrown
through the discharge spout.
In the row independent harvesting system, all
plants within the radius of action of the drums are
harvested.

TRACTOR SPEED

The displacement speed of the tractor must be
adjusted to the harvest conditions and characteristics
of the product to be harvested. It is recommended
to perform practical tests using different tractor
speeds and observe which one that best adapts to
the local conditions.
IMPORTANT!
Harvesting forage grass species like brachiaria, oat,
rye-grass, etc., due to their characteristics, requires
a greater displacement speed of the tractor, in order
to maintain adequate volume and flow to the feeding
of the machine. Under these conditions, a better
result is obtained by harvesting with a minimum
speed of 6 km/h.
JF 1000-AT
15