Publicidad
Idiomas disponibles
Idiomas disponibles
Even if the equipment has all its safety devices,
if necessary, during the installation and connec-
tion other safety devices may be supplemented
in accordance with applicable laws.
The illustration shows the position of the devi-
ces.
Gas supply tap: for turning the connection to
A)
the gas supply line on and off .
Safety thermocouple: cuts out the gas supply
B)
if the fl ame goes out.
Well lowering microswitch: detects that the
C)
well is in the "fully lowered" position and en-
sures that the burner can only be ignited and
water fed into the well.
Important
Make a daily check that the safety devices are
properly installed and in good working order.
The illustration shows the position of the signs
provided.
Nameplate with manufacturer and appliance
A)
data.
General hazard: read the manual carefully
B)
before carrying out any procedure.
General hazard: when washing the appli-
C)
ance do not point pressurised water jets at
internal parts.
General hazard: all relevant regulations
D)
must be complied with. "Install in compliance
with the relevant regulations and use in well
ventilated premises only".
General hazard: all relevant regulations
E)
must be complied with. "No liability is ac-
cepted in case of failure to comply with the
installation and commissioning instructions".
Burn hazard: watch out for hot surfaces.
F)
CE marking: this indicates that the equipment
G)
is compliant with all relevant laws applicable
to the product.
_ut_GB
SAFETY DEVICES
SAFETY AND INFORMATION SIGNS
- -
B
C
D
E
G
A
Arm crushing hazard: never insert hands in
H)
the pan while in use.
General hazard: take care, very hot steam.
L)
A
L
37M3222
F
GB
GB
37M3202
H
C
B
ENGLISH
Publicidad
