Cleaning And Sterilization Of The Torque Wrench - Mectron MULTIPIEZO Manual De Uso

MULTIPIEZO
08.5 Û CLEANING AND STERILIZATION
OF THE TORQUE WRENCH
PREPARATION
Take the wrench
EN
MATERIALS NECESSARY
- Enzymatic detergent with pH 6-9
- Water
- Ultrasound tank
- Brush with soft nylon bristles
- Distilled water
- Clean and soft cloth with low fiber-release
- Medical degree lubricant
- Single-use sterilization packets
- Steam sterilization
CLEANING AND DISINFECTION METHOD - Torque wrench
Prepare an enzymatic detergent solution
with pH 6-9, as per the instructions of the
manufacturer;
Place the insert in the ultrasound tank
submerged by the enzymatic detergent
solution at 40°C, for at least 10 minutes;
32
CAUTION: Do not use hydrogen
peroxide. If you intend to disinfect the
wrench, do not use hydrogen peroxide, but
only disinfectants with neutral pH (pH7);
always rinse with sterile water to preserve
the disinfection.
CAUTION: Once used, correctly dispose
of the enzymatic detergent solution, do
not recycle.
1
2
10 min 40°C