Publicidad
Idiomas disponibles
Idiomas disponibles
6.4)
Closing the test fixture
1) Open the test fixture as far as it will go
4) Tighten the quick-release screw using a
cross-head screwdriver
CAUTION
R
ISK OF INJURY BY CRUSHING OR SHEARING
Mechanical hazard when test fixture is open!
Before opening the test fixture, lock the drive unit using the drive unit lock.
Always use the handle to open and close the test fixture.
When closing the drive unit, do not move the anti-pinch protection until the drive unit is low
enough to reach it.
6.5)
Automatic opener/closer for manual opening and closing
For manual opening and closing of the test fixture with integrated automatic opener/closer, re-
move the gear wheel drive according to the following illustration.
43
2) Close the test fixture as far as the anti-
pinch protection
3) Turn the anti-pinch protection and close
the test fixture completely
5) Pull the locking bolt and fix it in the open
position by turning it.
©
INGUN: Subject to technical changes without notice. E&OE.
!
English
Publicidad
