Ingun MA 2 Serie Manual Del Usuario página 45

English
6.6) Automatic opener/closer - control function
The optional automatic opener/closer is supplied by INGUN without control unit and control panel.
INGUN provides a reference design for the control unit and control panel in the form of a circuit
diagram. This circuit diagram contains the following keys for operating the automatic opener/clos-
er. (For more details, see the technical manual for the MAxxxx.)
Automatic opener/closer - control panel
6.7) Testing
The test sequence varies significantly depending on the customisation of the fixture and the scope
of additional functions. Because INGUN's product range does not include test fixtures which are
ready for operation, INGUN cannot describe the test procedure comprehensively and cannot as-
sume any liability for this aspect of test fixture use.
7) Maintenance
WARNING L
ETHAL ELECTRIC SHOCK
Lethal electrical voltage at the test probes for > 25 VAC voltage and > 60 VDC voltage!
Before servicing, disconnect all affected devices from the power supply and secure (e.g.

with a sign) against unauthorised reconnection!
©
INGUN: Subject to technical changes without notice. E&OE.
Remove gear wheel
!
1) Motor shaft with gearing
2) Gear wheel
3) Flat washer
4) Screw for gear wheel
1) Stop
2) Open drive unit
3) Close drive unit
4) Operating mode switch
- Automatic operation
- Inching operation
5) Acknowledge
(Following emergency
stop or stop by safety
switch)
6) Emergency stop
44