Publicidad
Idiomas disponibles
Idiomas disponibles
17
DECLARATION OF INCORPORATION
The manufacturer INTERPUMP GROUP S.p.A. - Via E. Fermi, 25 - 42049 - S. ILARIO D'ENZA - Italy DECLARES that the product
identified and described as follows:
Name:
Pump
Type:
Reciprocating plunger pump for high pressure water
Trademark:
INTERPUMP GROUP
Model:
70 HT series
Is found to comply with the Machinery Directive 2006/42/EC
Standards applied: UNI EN ISO 12100:2010 - UNI EN 809:2000
The pump identified above meets all the essential safety and health protection requirements as listed in section 1 of Annex I of
the Machinery Directive:
1.1.2 - 1.1.3 - 1.1.5 - 1.3.1 - 1.3.2 - 1.3.3 - 1.3.4 - 1.5.4 - 1.5.5 - 1.6.1 - 1.7.1 - 1.7.2 - 1.7.4 - 1.7.4.1 - 1.7.4.2 and the relevant technical
documentation has been compiled in accordance with Annex VII B.
In addition, the manufacturer undertakes to make available, following a reasoned request, a copy of the relevant technical pump
documentation in the manner and terms to be defined.
The pump should not be put into service until the plant to which the pump is to be incorporated has been declared in
accordance with the provisions of the relevant directives and/or standards.
Person authorized to compile the technical file
Person authorized to draw up the declaration:
Reggio Emilia - December 2012
DECLARATION OF INCORPORATION
(In accordance with Annex II of European Directive 2006/42/EC)
Name: Maurizio Novelli
Address: INTERPUMP GROUP S.p.a. - Via E. Fermi, 25 -
42049 - S- ILARIO D'ENZA (RE) - Italy
CEO Ing. Paolo Marinsek
Signed:
33
Publicidad
