Fulcrum RED PASSION Manual Del Usuario página 25

14) If you do not have a syringe, unseat the beads on
one side of the tyre, pour in the liquid, inserting the
quantity suggested by the liquid manufacturer, and
reposition the bead in the central channel of the rim
(Fig. 12).
15) Reinflate the tyre without exceeding the maximum
pressure of 3.5 bar/50 (5 bar/72 Psi in case of
"Gravel" tyres) and carefully check that the tyre beads
are correctly placed on the rim in a uniform manner
along the entire circumference of the wheel (Fig. 13 -
13.1).
DANGER!
Never exceed the maximum pressure limit of
3.5 bar (50 psi). Inflating the tyre to a pressure
higher than the indicated value may result in a
sudden tyre blow-out and cause an accident and
severe or even fatal injury.
h
In case of 35 - 40 mm wide "gravel" tyres, never h
exceed the maximum pressure of 5 bars (72 psi),
or the limit pressure of the tyre if it is lower than
5 bars (72 psi).
16) Rotate and shake the wheel so the liquid can seal all the inner surfaces of the cover. Apply water and soap on the cover and check for any bubbles, which would indicate air
leaking from the cover. Position the wheel so that the liquid will flow to the area of the air leak, so the liquid can block it (Fig.14).
8
12
h
h
h
13.1
h
13
h
14
h
h
h