Fulcrum RED PASSION Manual Del Usuario página 28

4 - FW BODY AND REAR WHEEL LOCKING SYSTEM
Depending on the version, the rear wheel is available with:
- FW body for Shimano INC. HG 8/9/10s and SRAM CORP. PG 8/9/10s sprockets (Fig.18)
- XD FW body for SRAM CORP. XX1 sprockets (Fig.19)
The wheel can be transformed from one version to the other purchasing the FW body required and
the relative adaptors depending on the locking system used (please see the relative instructions).
5 - LOCKING OF THE FW BODY
FW body for Shimano INC HG 8/9/10s/11s sprockets and for SRAM CORP PG 8/9/10s
sprockets: the right bushing (Fig. 20) must be tightened anti-clockwise, respecting the tighte-
ning torque (15 Nm - 133in.lbs).
18
15 Nm (133 in.lbs)
20
19
11