Fulcrum RED PASSION Manual Del Usuario página 33

WARNING!
Using wheels that have not been centred properly or which have broken or damaged spokes may result in accidents, personal injury or death.
• Do not expose the products to high temperature, do not leave them closed in cars parked under the sun, do not keep them near radiators or other heat sources, do not leave
carbon or plastic products in direct sunlight.
8.1 - CLEANING THE WHEELS
CAUTION! Never use solvents, particularly alcohol, acetone, petrol and diesel, on the surface of the labels when cleaning the rim: these types of labels are
extremely resistant to atmospheric agents but they are susceptible to solvents and they cannot be replaced.
Use only mild cleaning substances such as water and neutral soap, or specific products for cleaning bicycles, to clean the wheels. Dry using a soft cloth and never
use abrasive or metallic sponges.
NOTE
- Salt, mud and sand seriously damage bicycles and their components. Thoroughly rinse, clean and dry your bike after using it in these conditions.
- If you use water under pressure to wash your bike, we recommend that you never point the water jet directly onto the hubs. Water under pressure, even just from the nozzle of
a garden hose, can penetrate the seals inside hubs and irreparably damage the bearings.
IMPORTANT: for cleaning the bicycle only use environmentally-friendly and neutral products without caustic substances and safe to use for you and for the environment.
8.2 - TRANSPORT AND SAFEKEEPING
When you transport the wheel separately from the bike or if you do not intend to use the wheel for a while, put it in a wheel bag to protect it from impacts, dust and dirt.
16
Rev. 04 - 07/2018