Fulcrum RED PASSION Manual Del Usuario página 30

6.2 - ASSEMBLY AND DISASSEMBLY OF XX1 SRAM CORP. SPROCKET PACK
6.2.1 - ASSEMBLY
• Before inserting the sprocket pack on the XD FW body, lubricate the body thread with synthetic grease.
• Insert the sprocket pack on the XD FW body.
• Use the Shimano Inc. TL-LR15 tool or the Park Tool Co. FR-5 tool to tighten the sprocket pack onto the XD FW body at the torque indicated by the manufacturer.
6.2.2 - DISASSEMBLY
• Disassemble the sprocket pack using the Shimano Inc. TL-LR15 tool or the Park Took Co. FR-5 tool and a wrench with chain.
• Remove the sprocket pack from the XD FW body.
7 - BRAKES
Fulcrum® RED PASSION / RED PASSION 3 wheels are available in the following versions:
- for disc brakes with the ISO 6-bolts system;
- for disc brakes "Center Lock" (with Fulcrum® Axial Fixing System™ - not compatible with "Center Lock" Oversize)
WARNING!
Choose the appropriate version for the type of brakes used. Do not use traditional brakes on a wheel for disc brakes and vice versa. Improper matching
could result in an accident, personal injury or death.
Note: For use and maintenance instructions of the brakes, refer to the Instruction Leaflet provided by the brake manufacturer.
13 15