Fulcrum RED PASSION Manual Del Usuario página 31

7.1 - ASSEMBLING THE ROTOR ON AXIAL FIXING SYSTEM™ SYSTEMS
• Fit the rotor into its seat, taking care with the direction
of rotation indicated by the arrow (Fig. 23).
• Fit the washer (A - Fig. 23) and screw the provided
lockring (B – Fig. 23).
• Tighten the lockring to 40 Nm (354 in.lbs) using
A B C D
A B C D
the tool UT-BB130 (C - Fig. 23 - not provided) and torque
wrench (D - Fig. 23).
35 N.m 40 Nm
5/7Nm
(354 in.lbs) 5/7 N.m
(44/62 in.lbs)
23 24
7.2 - ASSEMBLING THE ROTOR ON THE ISO 6-BOLTS SYSTEM
• Fit the rotor into its seat, taking care with the direction of rotation indicated by the arrow (Fig. 24)
• Screw in the 6 screws to 5/7 Nm (44/62 in.lbs) (Fig. 24).
WARNING
After donning protective gloves turn the rotor clockwise and tighten the rotor fixing screws in the order illustra-
ted in Fig.25.
25
14