Publicidad
Idiomas disponibles
Idiomas disponibles
It is important that the electrical installations are carried out by a qualified professional, as it
should calculate the power cable and meets the requirements of the equipment (size and ca-
pacity). The machine is equipped with heavy-duty cable.
NOTICE:
!
If you have a three phase delta system, connect higher voltage (wild wire) into L2 (red
cable).
NOTE: This machinery requires three-phase, four wire connections (three lines of voltage and
one ground), and the single-phase three-wire connection required (two lines of voltage and
ground).
IMPORTANT NOTE
Check the pump rotation of the machines for a good performance in
the circulation of propylene glycol.
The rotation is counterclockwise.
1.2.2 Water connections
The connections for the water flow of the EMP machines are located on one side of the equipment.
The connections must be previously installed in the place where the equipment will be installed,
taking into account that each model requires a different size connector.
Cold
water
coupling according to model
Hot
water
1
Water
2
valve
Water connections
Cable
outlet
Coupling
Ni
Installation
Water in (cold water)
1
Water out (hot water)
2
MODEL
NPT FEMALE
EMP 200
EMP 500
EMP 1500
EMP 3000
3/4
3/4
1
1 1/2
43
Publicidad
