EMERYMARK EMP 200 Manual De Operación página 53

2.2.1 Fill the vat
Flute
Recovery tank
2. Pour the amount of coolant indicated on the
this manual (p. 52).
4. Put the snorkel cylinders in place. Ignite the pump.
WARNING:
!
Do not start the pump if the recovery tank
it is empty.
1. Place the snorkels cylinders in the
Vat
corresponding holes.
Cilinder
snorkel
3. Remove the snorkel cylinders to fill the inner
tank (recovery tank).
5. It is very important that the vat always has coolant
liquid and is in motion. In the absence of coolant the
pump can be damaged. This damage is not covered by
the warranty.
Operation
53