CAPITAL SPORTS Oceanus Manual Del Usuario página 34

EN
5
Figure 1 Figure 2
Remove the cap (M) from the top of the container.
To fill water into the tank (figure 1), insert the straight hose of the water
pump (I) into a water tank and the flexible hose of the water pump into the
tank of the steering device. Make sure that the water container is higher
than the container of the rowing machine. Press the pump several times
to fill water into the water tank of the rowing machine until the desired
resistance value is reached according to the markings on the side of the
tank. The more water there is in the container, the higher the resistance.
Replace the container plug (M) as soon as the intended fill level is reached.
To empty the rowing machine's water tank, you must reverse the filling
procedure (figure 2). Insert the water tank plug into the water tank and then
wipe off the water with a dry cloth.
34