CAPITAL SPORTS Oceanus Manual Del Usuario página 37

Button functions and displays
SCAN
TIME
DISTANCE
CALORIE
TIME/500M
COUNT
STROKES/MIN
PULSE
In training mode, the SCAN function is active.
The main screen displays the following values in
sequence for 6 seconds on the main screen: TIME
> DISTANCE > CALORIE > TIME/500M > COUNT-
STROKE/MIN > PULSE. If you want one of these
values to remain displayed on the main screen,
press the ENTER key.
Displays your elapsed exercise time in minutes and
seconds. The computer automatically counts up in
steps of seconds from 0:00 to 99:59, while you can
set the value from 5:00 to 99:00.
Displays the total distance covered during training
up to a maximum of 99.99 km/mile and displays the
metre unit under 1 km/mile on the screen. You can
set a target distance from 1.00 to 99.00 km/miles.
The computer estimates the cumulative calories
burned at a given time during your workout. It counts
up from 0 to 9999. You can set the target calories
from 10 to 9990.
The time you need to reach a 500-metre distance,
depending on your current train speed.
The computer counts once when the bar
comes back after your move. And the computer
accumulates this count from 10 to 9990.
Shows how many times you row per minute. The
value range is between 15 and 999. If the value is
above 999, "E" is displayed in the window. If there is
no signal within 4 seconds, the value is reset to zero.
The console displays your heart rate in beats per
minute as you exercise. You can set the target value
from 80 to 180.
EN
37