Eurocave V-ROYALE-L Modo De Empleo página 16

6/ USING YOUR WINE CABINET FOR THE FIRST TIME
N.B.: to operate correctly, your cabinet must be placed in a room with a temperature of 0 - 35°C/ 32 - 95°F.
III. Choice of temperature setting unit (°C/°F)
+
set
1 2 sec. 2 secs.
Press and hold down the key for
approximately 2 seconds.
+
set
3
Press the button to confirm.
+
set
5
Press the .
IV. Setting the lighting mode
N.B.: replacement of the LEDs on the control panel and the shelves must only be carried out by a qualified electrician.
At any time you can choose the lighting you require using the lighting mode adjustment button.
You have 3 setting options for lighting:
Permanent lighting.
Lighting comes on when the door opens
(it is off when the cabinet door is closed).
Lighting disabled.
V. Setting the lighting intensity
+
set
2 sec.
1 2 secs.
Press and hold down for approximately 2 secs
16
the key.
EN
+ +
set set
+
set
+ +
set
set
2
Press the or keyto choose thedisplay "Unit".
+
set
4
Choose the setting unit (°C or °F) with the
or keys.
+
set
+
set
Precautions to observe: bright light, never look directly into
the beam of the LED.
+
+
set set
2
Press the or key to choose the "Light"
display.
6/ USING YOUR WINE CABINET FOR THE FIRST TIME
3
Press the button to confirm.
+
set
2 sec.
5
Press the .
VI. Charcoal filter
A. Resetting the charcoal filter meter
1
Press and hold down for approximately
2 seconds the key.
3
Press the button to confirm.
2 sec. 5
Press the button to confirm.
B. Changing the charcoal filter
+
set
1
Unscrew the button of the charcoal filter hatch, under the control panel.
+ +
set set
4
Set the lighting intensity with the
+
set
+
set
2 secs.
2 sec. 2
Press the or key to choose the "Filter"
display.
+
set
4
Press and hold down for approximately 5 seconds the
key to reset the meter to 365 days.
+
You can consult the meter at any time by repeating steps 1, 2, 3
set
then pressing the
2
The hatch will open.
+ +
set set
or keys.
+ +
set
set
+
set
5 secs.
5 sec.
or key to return to the main menu.
+
set
17
EN