Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
INSTALLATION
This section gives instructions for installing the Simplex 125. Place all box contents on a smooth
dry, surface and proceed with the following instructions.
The Simplex 125 comes with holes for wall mounting and rubber feet for locating it on a table or
desk top. If you are locating it on a table or desk, you can simply set it on the surface. If you are
mounting the Simplex 125 on a wall, instructions are included on page 6. DO NOT APPLY POW-
ER AT THIS TIME!
CAUTION! Do not install the Simplex 125 in places subject to high humidity and dust, in plac-
es subject to strong vibrations, in areas exposed to direct sunlight, or in places
subject to temperatures below 23° F (-5° C) or above 113° F (45° C).
To Remove the Cover
1.
Insert the black release key into the cover and turn
the key clockwise a quarter turn.
2.
Firmly grasp the cover and lift up and away from
the clock.
3.
Once the cover is removed, turn the key back one-
quarter turn counterclockwise. The key must be
in this vertical position (or removed) in order
for the cover to snap back into place!
4
Publicidad
