Publicidad
Idiomas disponibles
Idiomas disponibles
PROGRAMMING
To Set the Starting Number
After selecting the Repeat option in the previous step, the programming arrow appears next to Start-
ing Number. Select from 0 through 999999 (the number of digits corresponds to the number of digits
set in the Print Numbering section on page 17).
A. Remove the cover and press the CHANGE button once (refer to page 8 for parts location).
B. Press ACCEPT until the programming arrow appears next to STARTING NUMBER.
C. Press CHANGE once.
• The first digit of the currently set STARTING NUMBER begins to flash. If you have
selected a number with more than one digit, you will have to set each digit.
Press CHANGE until the desired number is displayed.
D. Press ACCEPT to set the STARTING NUMBER shown on the display.
• The programming arrow moves to the Daylight Savings Time Ahead option. To modify that
option, proceed to step C of the next section. To exit programming at this point, hold
ACCEPT down while the programming arrow cycles through all the options.
To Change Daylight Saving Time (DST) Ahead
Use the following steps to set the day (at 2:00 AM) on which the Simplex 125 sets the time ahead
one hour to DST.
A. Remove the cover and press the CHANGE button once (refer to page 8 for parts location).
B. Press ACCEPT until the programming arrow appears next to AHEAD.
C. Press CHANGE once.
• The currently set WEEK NUMBER begins to flash.
Press CHANGE until the desired week of the month (1st, 2nd, 3rd, 4th, or Last) displays.
Press ACCEPT to set the week shown.
• The currently set MONTH begins to flash.
Press CHANGE until the desired month is shown.
Press ACCEPT to set the month shown.
• The currently set DAY OF THE WEEK begins to flash.
Press CHANGE until the desired day of the week is shown.
D. Press ACCEPT to set the DST AHEAD options shown on the display.
• The programming arrow moves to the Daylight Savings Time Back option.
18
Publicidad
