Publicidad
BASIC CONNECTIONS _
CONNECTIONS
IMPORTANT
¢ Connect the AC cord after connecting speakers, antennas, and
all optional equipment.
* There are no differences between the front speakers. The
speakers can be connected as L (left) or R (right).
See the illustration below which corresponds to steps 1 to 5 to
complete the connections.
1 Connect the flat cables of the TX-Z9300
and
FX-WZ7300 to the MX-Z3200M.
Push the connector until it clicks.
2 Connect the supplied MW/LW antenna (@ and FM
antenna @ to the TX-Z9300.
¢ To stand the MW/LW antenna, fix the claw to the slot.
> Eq
¢ Make sure to connect the FM antenna to the center of the
FM 75 @ terminals securely.
,
3 Connect the speaker cords to the SX-Z3200 front
speakers.
The cords with the white stripes should be connected to the
® terminals and the black cords to the © terminals.
4 Connect the speaker cords to the MX-Z3200M.
The cords with the white stripes should be connected to the
® terminals and the black cords to the © terminals in the
same manner as step 3.
5 Connect the AC cord to an AC outlet.
=...
_
To be continued.
Publicidad
