Publicidad
2
MEMORY
3
Al FUNCTION
Or *O
Al MEMORY FUNCTION
The Al MEMORY FUNCTION lets you store two complete sets
of system settings, you can recall either set by pressing just one
button.
The settings of the following buttons can be stored.
FUNCTION buttons
T-BASS button
BBE button
GEQ preset buttons
SPECTRUM ANALYZER button
VOCAL FADER button
'1 Adjust the settings of the above buttons to suit
your preference.
2 Press the MEMORY button.
"MEMORY?" flashes in the display for 4 seconds.
lf the flashing stops, press the button again.
3 Within these 4 seconds, press either the Al
FUNCTION A or B button.
To recall an Al MEMORY FUNCTION setting
Press the Al FUNCTION A or B button while the power is either
on or off. The power turns on automatically if off, or the current
function stops if on. Play begins with the stored sound settings
if the CD or TAPE function is stored and a CD or tape is inserted.
To select with the remote control
Each time the Al FUNCTION A/B buiton is prsee) Al MEMORY
mode A and B toggle. Select the desired Al MEMORY mode.
The following settings are factory preset for the Al MEMORY
function.
AIA
RuNGTION [o>
[~eea
| rock _|
VOCAL FADER
Off
PEAKHOLD
AURORA
SPECTRUM
ANALYZER
NOTE
Once Al MEMORY
setting is stored, the previous setting is
cancelled.
if the preset source is not prepared for the selected FUNCTION,
the sound settings only are recalled and adjusted.
Publicidad
