Publicidad
Ba
>T-BASS —=T-B,
T-BASS
ae
copeomenecee
ROSS
ASS
all
|
<--—T-BASS
esas
fee BBE
-—BBE
BB
oe
E
alll
(|
B
BE
<
sitll
SOUND __
SIMPLE AUDIO ADJUSTMENT
Use the buttons on the amplifier.
Use the VOLUME, SUPER T-BASS and BBE SYSTEM to adjust
the sound.
VOLUME — BY
Turn VOLUME control ©, or press VOLUME button © on
the remote conirol.
To mute the sound
Press the MUTE button on the remote conirol. The indicator on
the VOLUME control flashes. To restore the sound, press again.
To change the left/right balance
Turn the BALANCE control.
SUPER T-BASS — EI
The SUPER T-BASS enhances the realism of low-frequency
sound.
Press the T-BASS button. Each time the button is pressed, the
level changes. Select one of the four levels, or the off position to
suit your preference.
BBE SYSTEM —
The BBE system enhances the clarity of high-frequency sound.
Press the BBE button. Each time the button is pressed, the
level changes. Select one of the four levels, or the off position to
suit your preference.
Changing the spectrum analyzer display
A variety of spectrum analyzer display patterns can be shown in
the display window of the amplifier.
Press the SPECTRUM
ANALYZER
button on the amplifier.
Each time the button is pressed, one of the 7 spectrum analyzer
display patterns is selected. The name of the selected display
pattern appears in the display window of the amplifier for 2
seconds.
To dim the display
If the display window is too bright, keep the SPECTRUM
ANALYZER button pressed for 2 seconds or more. The display
window of the amplifier becomes dim. To restore, press the button
for 2 seconds or more again.
Using the headphones
Connect headphones to the PHONES jack with a stereo standard
plug (96.3 mm/'/4 inch). No sound is output from the speakers
while the headphones are plugged in.
Publicidad
