Publicidad
O
Using a phillips screwdriver, attach the floor panels (A) together with six
screws (AA).
Place and center the floor assembly onto the prepared foundation.
0x6
6
Insert the tabs on the front right side panel (B) into the slots in the floor
panel (A). Slide the front right side panel to lock in place.
NOTE: The edge of front right side panel with hinge tabs will be the front
of the shed.
Using the easy driver (DD), attach the front and rear right side panels
(B, C) together with two easy bolts (EE). DO NOT over tighten.
hinge tabs
Ell
Insert the tabs on rear right side panel (C) into the slot in floor panel (A).
Slide the rear right side panel to lock in place.
NOTE: The edge of the rear right side panel overlaps to the inside of the
front right side panel (B).
8
12
Publicidad
