Publicidad
9
With the back panel at an angle, insert the tabs on back panel (D) into
the back floor panel (A). Rotate the back panel upright to lock in place.
NOTE: The edge of the back panel overlaps the outside of the rear right
side panel (C).
Insert the tabs on the rear left side panel (E) into the slots in the rear
floor panel (A). Slide the rear left side panel to lock in place.
NOTE: The edge of the rear left side panel overlaps to the outside of the
back panel (D).
13
10
Bend the corner on the back panel (D) inward. Using the easy driver
(DD), attach the back panel to the rear right side panel (C) with two easy
bolts (EE). DO NOT over tighten.
all
Bend the corner of the rear left side panel (E) inward. Using the easy
driver (DD), attach the rear left side panel to the back panel (D) with two
easy bolts (EE). DO NOT over tighten.
Publicidad
