Publicidad
Slide the front roof panel (J) to the rear and open position.
In
Using the easy driver (DD), attach both back-to- roof retainers (L) to the
back panel (D) using one easy bolts each (EE). DO NOT overtighten.
2
18
Place the front roof panel (J) across the front left side panel (F) and the
front right side panel (B). Be sure the inner roof guides (K) snap fully
over the side panels.
19
20
Position one of the header beams (S) into the channel across the
front left side panel (F) and the rear left side panel (E). Using a
phillips screwdriver, secure the header beam with six screws (CC).
Repeat for the remaining header beam across the front right side
panel (B) and the rear right side panel (C)
15
Publicidad
