Publicidad
El
From the underside of rear roof panel (I), use the easy driver (DD) to attach two rear roof hold downs
( vv)
using one easy bolts (EE) each. DO NOT overtighten.
Be sure the rear roof hold downs attach onto the header beams (S) as shown before tightening easy bolts.
Repeat for other side with the two remaining rear roof hold downs
( q.
4
EEI
Slide the front roof panel (J) forward to the closed position. On the outside
of the shed, on both sides, snap one outer roof clamp (M) over the front
roof panel and the rear roof panel ( I).
NOTE: Position the outer roof clamps with the text at the bottom.
16
Es11
Snap the left lower door retainer (R) into place at the bottom of the front
left side panel (F).
Publicidad
