Cebora SYNSTAR 350 TS Manual De Instrucciones página 42

4 GENERAL DESCRIPTIONS
The device is a multi-process system suitable for MIG/MAG welding and MMA welding (with the exception of cellulosic
welding), developed with inverter technology. The device may be used only for the purposes described in this manual.
The device must not be used to defrost pipes.
4�1 Explanation of technical specifications
This device is manufactured according to the following standards:
IEC 60974-1 / IEC 60974-2/ IEC 60974-5/ IEC 60974-10 (CL. A) / IEC 61000-3-11 / IEC 61000-3-12 (see note 2).
No.
3 ~
f
1
f
2
MIG
MMA
U0
X
I2
U2
U1
3~ 50/60Hz
I1 Max
I1 eff
IP23S
S
NOTES:
1- T he machine has also been designed for use in environments with a pollution rating of 3. (See IEC 60664).
2-This equipment complies with IEC 61000-3-12 standard provided that the allowed maximum impedance Zmax of
the unit is lower or equal to 0.026Ω at the interface point between the user unit and the mains. The fitter or the unit
user are responsible for connecting the equipment to a power supply with a maximum allowed system impedance
Zmax lower or equal to 0.026Ω. If required, they may contact the electric power supplier to check this value.
42
Serial number, to be indicated on any request regarding the welding machine.
Three-phase static frequency converter transformer-rectifier
Suitable for MIG-MAG welding
Suitable for MMA welding
Secondary open-circuit voltage
Duty cycle percentage. The duty cycle expresses the percentage of 10
minutes during which the welding machine can run at a given current without
overheating
Welding current
Secondary voltage with I2 current
Rated supply voltage
50 or 60-Hz three-phase power supply
Max. current consumption at the corresponding current I2 and voltage U2
This is the maximum value of the actual current consumed, considering the
duty cycle
This value usually corresponds to the capacity of the fuse (delayed type) to
be used as a protection for the equipment
Degree of housing protection
Grade 3 as the second digit means that this device may be stored, but it is
not suitable for use outdoors in the rain, unless it is protected
Suitable for use in high-risk environments
3301291-EN 3301291