Cebora SYNSTAR 350 TS Manual De Instrucciones página 61

7�5�4 Copying a welding JOB
7�5�5 Welding with a JOB
7�5�6 Renaming the welding JOB
Set Job Mode and turn knob 2, or the torch UP/DOWN pushbuttons to navigate between saved JOBS. A JOB can be
selected when the machine is in standby or while it is delivering power. Switching between JOBS with the arc on is
NOT allowed when they relate to different processes, e.g.:
- MIG -> MMA
3301291 3301291-EN
Select the memory position of the JOB to be copied by
turning knob 2
Press pushbutton and the JOB will be copied to
the memory.
Select a free memory position using 2 and press
The JOB will be copied to the new position.
Select the memory position of the JOB to be used by
turning knob 2.
Press the Job Mode pushbutton to activate welding
with the selected JOB
Press the pushbutton
The Job Mode operating mode is active with the
selected JOB (2 in the example).
.
Select the JOB to be
renamed by
knob 2.
Use the pushbutton
to invoke the keyboard.
Rename the
and press
CEBORA_WORK1)
turning
JOB
(e.g.
61