Cebora SYNSTAR 350 TS Manual De Instrucciones página 58

7�4 Settings menu
This menu is used for the welding power source basic settings
7�4�1 Machine status
7�4�2 Date and Time Setting
7�4�3 Resetting factory settings
7�4�4 Language setting
7�4�5 Setting measurement unit
58
Use knob 2 to select Machine status mode.
The power source status menu displays information
about power source output voltage and current, power
source internal temperatures, motor voltage and
current, battery voltage.
Use knob 2 to select Clock Setup mode.
Adjust values by turning knob 2 and confirm by
pressing.
To confirm date and time press the key OK
To exit press the key
Use knob 2 to select Factory Setup mode.
This function resets the factory preset values.
All Restore all jobs and settings
Jobs only Resets only stored "Job" working
programs.
Exclude jobs Resets all but saved "Job" working
programs.
Use knob 2 to select Languages mode.
To confirm the language simply hold down knob 2
To exit press the key
Use knob 2 to select Units of measurement mode.
Select the unit of measure, metric or imperial.
3301291-EN 3301291