Maytag Precision Touch 750 Serie Guía De Uso Y Cuidado página 19

Self-Clean Oven
is acid-resistant, not acid-proof. The porcdain finish may
discolor if acidic spills are not wiped up before a sdf-
dean cycle.
- It is normal for parts of the range to become hot during a
self-clean cycle
• To prevent damage to oven door. do not attemp; to open
the door when "Lock" is displayed,
- Avoid touching cooktop, door. window or oven veto area
during a clean cycle,
o Do not use commercial oven cleaners on the oven finish
or around any par[ of the oven. The,,'wiii damage the
finish or parts.
• Do not leave baking/pizza stone in the oven daring
self=clean.
The self-clean cycle uses above-normal cooking temperatures
to automatically clean the oven interior.
It is normal for flare-ups, smoking, or flaming to occur during
cleaning if the oven is heavily soiled. It is better to clean the
oven regularly rather than to wait until there is a heavy build-
up of soil in the oven.
During tile cleaning process, tile kitchen should be weft
ventilated to get rid of normal odors associated with cleaning.
Before Serf-Cleaning
1. Turn off the oven light before cleaning. The light may burn
2. Remove broiler pan, all pans, and oven racks from the
oven. The oven racks will discolor and may not slide easily
after a self-clean cycle if they are not removed.
3. Clean oven frame, door frame, area outside of gasket, and
around the opening in the door gasket with a nonabrasive
cleaner such as Ben Ami * or
detergent and water. The self-
cleaning process does not clean
these areas. They should be
cleaned to prevent soil from baking
on during the clean cycle. (The
gasket is the seal around the oven
door and window.}
4. To prevent damage, do not clean or rub the gasket around
the oven door. The gasket is designed to seal in heat
during the clean cycle.
5. Wipe up excess grease or spillovers from the oven bottom.
This prevents excessive smoking, flare-ups or flaming
during the clean cycle.
6. Wipe up sugary and acidic spillovers such as sweet
potatoes, tomato, or milk-based sauces. Porcelain enamel
Notes:
° Oven temperature must be below 400° F to program a
clean cycle.
, Only one oven can be cleaned at a time°
° Both oven doors lock when either oven is being
cleaned.
To set Self-Clean:
1. Close the oven door.
Clean
2. Press the Clean pad.
° "Clean" and "SEt" flash in the display.
If the door is not closed within 25 seconds, the self-
cleaning operation will be canceled and the display will
return to the time of day.
3. Press the More+ or Less- pad.
° "MEd" for medium amount of soil (3 hours}
appears in the display.
If the door is not closed, "door" will appear in
the display. After 45 seconds, three beeps will
sound, the self-cleaning operation will be canceled
and the display will return to the time of day.
4. Press the More+ pad twice for heavy soil (4 hours}.
, "HVy" will be displayed.
Press Less- pad twice for light soil (2 hours}.
, "LITE" will be displayed.
Choosing the soil level of the oven automatically programs
the self-cleaning time. "Lock" flashes in the display.
5. After four seconds, the oven will start cleaning.
, The cleaning time will start counting down in the display.
, "Lock" will appear in the display and will flash until the
doors are locked. "Lock" will then remain lit.
, "Clean" will remain lit in the display.
To Belay a Self-Clean Cycle:
1. Press the Delay pad once for upper
oven and twice for lower oven.
° "dLY" flashes.
° "0:00" flashes in the display.
2. Press the More+ or Less- pad to set the
amount of time you want to delay the cycle.
Delay time can be set from ten minutes (10:00}
to 11 hours, 59 minutes [11:59}. cent.
Brand names for cleaning products are registered trademarks of the respective manufacturers.
18