Publicidad
Idiomas disponibles
Idiomas disponibles
UK
in proximity of the control panel of the machine, the positioning of which is up to the user, within the length limits of the
connection wire (10 m).
3.6 Noise and Vibration Indications
3.6.1 Noise
The WSH - WTH SYSTEMS are engineered and constructed in such a way to reduce to the minimum the level of noise released
during the normal functioning.
The A-weighting level of acoustic pressure generated by the WSH - WTH SYSTEMS and its measurement during functioning,
following the criteria imposed by the norms in force, is lower than 70 dB (A).
3.6.2 Vibrations
In conditions of use compliant to the indications supplied by the producer in the present manual, the vibrations are not such to
create situations of danger.
However, if vibrations do occur, the operator must immediately stop the machine and inform the assistance service of the
Producer.
3.7 Proper and Improper Use of the Machine
The machine is engineered and constructed for the air conditioning of environments, with the end of ensuring the preservation of
wine bottles. More specifically, the machine is capable of maintaining the temperature and humidity necessary for the
preservation of the wine inside the environment in which it is installed.
The machine exists in a wall-mounted single block (WTH) or split (WSH) version.
The
can only use the refrigerant gas for which it has been engineered (R404A).
MACHINE
The machine has been engineered and constructed to operate in environments where a potentially explosive atmosphere is not
present, and cannot of itself generate a potentially explosive atmosphere.
The machine series WTH is not suitable to be installed outside
It is a sound cautionary norm to place powder fire extinguishers near the machine. To prevent the possibility of a fire outbreak, it
is necessary to keep the machine clean of plastic pieces, oils, solvents, paper, and rags.
The use of the machine for different operations could cause harm to the persons or the very machine and are, therefore,
considered improper usages, for which the Producer does not deem itself responsible.
:
WARNING
3.8 General Warnings and Behavioral Norms
In order to avoid any condition of risk to persons or damages to the machine, we recommend that you scrupulously follow the
general warnings and behavioral norms reported herein.
DANGER:
The operators appointed to the management of the machine must be properly instructed for its best possible use and without
risk implications, and must operate in a comfortable environment that can ensure the best possible safety and hygiene
conditions.
DANGER:
Before using the machine, make sure that any condition dangerous to safety has been duly eliminated, and that no operators
are present in the dangerous areas in proximity of the machine.
Before using the machine, make sure that all the guards are in their proper place and that all the safety devices are present
and efficient.
Warn the designated managers of any irregularity in the functioning of the machine or of any problem relative to the integrity
of the protections of the machine.
Carefully read the labels on the machine, do not cover them for any whatsoever reason, and replace them immediately in
case they are damaged.
Do not lay liquid containers on the machine.
Consult the present manual concerning the safety prescriptions in force and the specific IPDs to use for personal safety; in
particular, in any case, the personnel appointed to use the machine must wear suitable clothing, avoiding to wear or paying
the necessary attention to:
fluttering, loose clothing,
large sleeves,
dangling neckties or scarves,
necklaces, bracelets, or rings.
The personnel appointed to the maintenance of the machine must be knowledgeable of all the procedures reported in
Chapter 6 - Maintenance and Demolition, and possess an adequate technical preparation to correctly interpret the
instructions and diagrams attached to the present manual, and to intervene on the machine.
The area where the maintenance operations are performed must always be clean, dry, and with the suitable equipment
always available and efficient.
The work area must never be occupied, so that it interferes with the freedom of movement of the operator. In case of an
emergency, immediate access to the machine by appointed personnel must be guaranteed.
in case of a different type of use, it is essential to first consult the Technical Department of the
Producer.
the Producer rejects any responsibility for any damages to things and/or persons deriving from
improper interventions carried out by personnel that isn't qualified, trained, or authorized.
forbid that the machine be used by unauthorized or by untrained personnel without surveillance: in
fact, before starting to work, each operator must be perfectly knowledgeable of the position and the
functioning of all the controls and the characteristics of the machine; he/she must, furthermore, have
F
read the present manual.
ULLY
WSH-WTH Pag. 40
REV. 01 04/14
Publicidad
