Prebena PKT-8-RHC40 Manual Del Usuario página 127

Checking the function
▶ Set the tool tip of the fastener driving tool on a surface of suitable
material with the corresponding thickness.
▶ Trigger the fastener driving tool.
▶ Check the following items:
− Triggering occurs only when the triggering safety device
is pressed in, or in other words when the tool tip is firmly
pressed against the subsurface.
− For single triggering: The depressed triggering safety device
and the trigger button must always be moved back to the original
position to be triggered again.
▶ If the insertion depth is not correct, change the setting
on the adjusting wheel (see page 47).
▶ Run a test again at the point where a nail will be driven
in and check the insertion depth.
 If all functions are performed correctly, you can use
the fastener driving tool.
Danger due to faulty fastener driving tool.
The operator may injure himself or others and
damage the materials in use.
▶ Never use a fastener driving tool that is not
working properly.
▶ Send it to the manufacturer for repairs.
WARNING
Before operation
45