Publicidad
Idiomas disponibles
Idiomas disponibles
Safety
6. Service
Have your power tool repaired only by skilled and qualified
personnel and only with genuine replacement parts.
This will ensure that the safety of the power tool is maintained.
Safety instructions for fastener driving tools
• Always assume that the power tool contains nails. Careless
handling of the fastener driving tool can lead to nails being ejected
unexpectedly and injuring you.
• Do not point the power tool at yourself or at other persons
in your vicinity. Unexpected triggering may cause a nail to
be ejected, which could lead to injuries.
• Do not actuate the power tools before it is solidly placed
on the workpiece. If the power tools is not in contact with the
workpiece, the nail may rebound away from the fastening point.
• Disconnect the power tool from the power supply or battery
if the nail in the power tool jams. If the fastener driving tool is
connected, it may accidentally be triggered while removing a nail
that is lodged in place.
• Be careful when removing a nail that is lodged in place.
The system may be under tension and the nail could be forcefully
ejected while you are trying to remove the jammed nail.
• Do not use this fastener driving tool to fasten electrical lines.
It is not suitable for the installation of electrical lines and the
insulation of electrical cables could be damaged, thereby causing
electric shock and the danger of fire.
14
Publicidad
