Prebena PKT-8-RHC40 Manual Del Usuario página 142

Transport and storage
To pack the fastener driving tool in the case, follow these steps:
▶ Turn off the tool.
▶ Remove the rechargeable battery.
▶ Empty the magazine.
▶ Clean the tool (see page 62).
▶ Place the compressed air cartridge, fastener driving tool,
rechargeable batteries and battery charging station in the
transport case.
▶ Close the transport case.
Transporting the fastener driving tool
The type of transport determines whether you are transporting
the fastener driving tool over short or long distances.
Short distances
Short distances are no longer than 10 meters in length.
Long distances
The following distances are considered "long distances"
for transporting the fastener driving tool:
• Distances longer than 10 m,
• Distances that lead over an uncertain subsurface,
• Distances that must be covered in an unusual body position.
Transporting the fastener driving tool over short distances
▶ Turn off the tool.
▶ Carry the fastener driving tool by the handle with the tool tip
pointing at the floor.
60