Fundamental safety notices
Safety instructions
Preventing explosion hazards
Serious or fatal injuries possible due to explosion.
▶ Always assume that the power tool contains nails.
▶ Careless handling of the fastener driving tool can lead to nails
being ejected unexpectedly and injuring you. Never use the
fastener driving tool in places subject to a danger of explosion.
▶ Never operate the fastener driving tool with oxygen or with
any other flammable gases or gas mixtures.
▶ Do not expose the compressed air cartridge to temperatures
above 100 °C.
Preventing serious or fatal injuries
Serious or fatal injuries possible if the fastener driving tool is used
incorrectly.
▶ The nails have high penetrating power! Never point the fastener
driving tool at yourself, other persons or animals.
▶ Always hold the tool while working by the insulated handle
surfaces.
▶ The fastener driving tool must only be triggered when the tool
tip is pressed against the workpiece.
▶ Make certain you do not accidentally activate or touch the
triggering mechanism. Be especially attentive of this when setting
the tool down or changing your working position.
▶ Remove the rechargeable battery and vent the fastener driving
tool before every maintenance task.
▶ Ricocheting nails are also dangerous! Normally the fastener
driving tool must only be triggered when the tool tip is pressed
against the material.
▶ Do not drive nails into power lines, gas lines or water lines.
for
fastener driving tools
Safety
15