cecotec BOLERO HEXA C134500 Inox A Manual De Instrucciones página 76

ENGLISH
7. TROUBLESHOOTING
- If there is a fault, before contacting the official Cecotec Technical Support Service, make
sure it is not caused by an improper use and check the following table to try and solve the
problem on your own.
- In most cases, the user itself can solve technical faults easily.
Fault
The appliance
does not work
The knobs
cannot be
easily used
Food is not cooked enough on the
time indicated in the recipe
Uneven toasting
The light does not switch on
Warning - risk of electric shock
Incorrect repairs can be dangerous. Refer only to authorised technical personnel for repairs
and replacement of damaged power cables. If the appliance is defective, unplug it from the
power supply or switch off your home circuit breaker. Contact the official Cecotec Technical
Support Service.
8. ENERGY EFFICIENCY ACCORDING TO EN 60350-1
Take into account the following information:
- The measurement is carried out in "ECO" mode (depending on model) to determine the
forced air mode data (depending on model) and the label class.
76
BOLERO HEXA C134500 INOX A
Possible cause
Blown fuse.
Power cut.
There is dirt
under the knobs.
Possible solution
Check the residual current circuit breaker in the
electrical switchboard of your home.
Check if the kitchen light or any other appliances
work.
Proper cleaning ensures optimum performance
You are using a different temperature to the recipe
one. Check the temperature again.
The amount of ingredients is different to the recipe
one.
Check the recipe again.
The temperature setting is too high, or it is not
placed on the correct level. Check the recipe and
settings again.
You must replace the light bulb.