Section 2. Getting Ready To Sew Connecting Machine To Power Supply; Before Using Your Sewing Machine; For Your Safety; Controlling Sewing Speed - Janome Hello Kitty hk15822 Manual De Instrucciones

r
e
q
w
SECTION 2. GETTING READY
TO SEW
Connecting Machine to Power
t
Supply
CAUTION:
Before connecting the power cord, make
sure the voltage and frequency shown on
the machine conform to your electrical
power.
1. Turn off the power switch q.
2. Insert the machine plug w into the
machine socket e.
3. Insert the power supply plug r into the
outlet t.
4. Turn on the power switch q to activate the
power and sewing light.
q Power switch
w Machine plug
e Machine socket
r Power supply plug
t Outlet

Before Using Your Sewing Machine

Before using your sewing machine for the
first time, place a waste fabric under the
presser foot and run the machine with thread
for a few minutes. Wipe away any oil which
may appear.

For Your Safety

* While in operation, always keep your eyes
on the sewing area. Do not touch any
moving parts, such as the thread take-up
lever, handwheel or needle.
* Always turn off the power switch and
unplug from the power supply:
- When leaving the machine unattended
- When attaching or removing any parts
- When cleaning the machine
* Do not place anything on the foot control,
when not sewing.

Controlling Sewing Speed

Sewing speed can be varied by the foot
control.
The harder you press on the foot control, the
faster the machine runs.
8