Knit Stitch; Button Sewing - Janome Hello Kitty hk15822 Manual De Instrucciones

q w
r t
q w
r t

Knit Stitch

e
q Stitch pattern:
w Presser foot:
5
e Thread tension:
4
r Stitch length:
3
t Stitch width*:
This knit stitch is ideal for sewing swimwear
and stretch velour because it provides the
greatest amount of elasticity and strength.
Place your fabric to allow a 5/8˝ (1.6 cm)
seam.
Trim the seam allowance after sewing.

Button Sewing

e
q Stitch pattern:
w Presser foot:
e Thread tension:
r Stitch length:
t Stitch width*:
y Darning plate
y
z Attach the darning plate. Place the button
below the zigzag foot, making sure to
align the holes with the horizontal slot in
the foot. Turn the handwheel, so that the
needle is in its leftmost position, and then
drop the needle through the left hole in the
button.
x Lower the presser foot to hold the
button in place. Determine which zigzag
width setting matches the distance
between the button holes. The needle
must go safely through each hole when
sewing.
c Depress the foot control and sew about 10
stitches.
v Trim excess threads from both sides of the
fabric.
NOTE:
If the presser foot slips off a small button,
place a spacer of the same thickness
behind the button to prevent the foot from
slipping.
36
G
Zigzag foot
1 to 4
S.S.
5
C
Zigzag foot
2 to 6
Any
Adjust as necessary