Drawing Up Bobbin Thread; Needle Threader - Janome Hello Kitty hk15822 Manual De Instrucciones

z
x
c
z
x
c

Drawing up bobbin thread

z Raise the presser foot. Hold the needle
thread lightly with your left hand.
x Rotate the handwheel counterclockwise,
toward you, for one complete turn. Bring
the bobbin thread up by pulling the needle
thread up.
c Pull both threads 4˝ to 6˝ (10.0 to 15.0 cm)
under and behind the presser foot.

Needle Threader

z Raise the needle to its highest position.
Pull down the needle threader knob as far
as it will go. The hook comes out through
the needle eye from behind.
x Lead the thread around the guide and
under the hook.
c Release the knob slowly while holding the
thread end with your hand. A loop of the
thread is pulled up through the needle eye.
* The needle threader can be used with a
#11 to #16 needle or Blue tipped needle.
Thread size 50 to 100 should also work well.
20